Well my kit arrived from http://www.kershawdesigns.com/ so I decided to start building. First I removed all the nitro gear on the buggy.
Then mounted the motor mount, I was correct when I thought the mounting holes for the center diff of the MBX6 were the same :). But the top plate holes were a little off, as you can see. I am going to fabricate a new top plate.
I put some orders in for my motor and ESC which I will show later, and also a 5200mah 60c 4s battery from http://www.terranovahobby.ca/product.php?productid=1956&cat=83&page=1 and new body, tires and some diff oils from http://www.amainhobbies.com/
Stay tuned 🙂